INTRODUCTION

 Fantastic Sequin Device

BETTER THAN ORIGINAL

for the Single/Multi-head computerized

Embroidery Machine /Quilting Macine/Shiffli Machine

INTRODUCTION

It's a only small part of embroidery machine. But, it has very beautiful & precised function which are you may dream about... Like ....

1. Auto-mend function

We might be only one who has fully automatic auto-mend function.

When the spangle missing by thread cutting, you can modity it same as embroidery machine does. You only need to operate the toggle function of embroidery machine which are located at the embroidery head each mostly. Then, our sequin device work only that head and others are stopped same as other head's embroidery work stopped. When the automend start point comes, our sequin device start all together. Your headache is over to do amending by manually.

2. Forwarding function

It gives you easy work to set the spangle.

When you set the spangle through the roller, you can just press the

FORW BUTTON at the individual controller. The sequin will forward through

all the tunnel of the process step.

3. Wider/Longer Space benefit

Full size of the sequin work/embroidery space as same as table size given. It serves you 8cm to 10cm wider/longer sequin work space depends on the embroidery machine brand than others.

4. Auto/Manual lifting system

When the thread cutting comes/color change/ending of work, it's lifting by Air system automatically.

When you want to reset the sequin wheel individually in case, you can just press the LIFT BUTTON at the individual controller simply.

5. Two sequin device for one head (New version... coming soon....)

With one controller/driver, you can operate 2 sequin device at one head. Plus, you can attach it to any side of needle base. i.e., Left/Right beside or Left/Right front side.

You can choose it and mix it also for multi head embroidery machine.

You have more various choice of color/size/design by two sequin device instead of one.

6. Return to Origin

When the electric power off suddenly, it's O.K. When the electric power on

again, it goes to the origin automatically. So, you can turn off the electric power off after you finished the sequin embroidery work. And turn on again as you wish. You can also reset the origin point manually by RESET button also.

7. High speed upto 2,000rpm.....

It's really something!!! It goes same as the embroidery machine speed.

It's upto 2,000rpm.

8. Individual Controller/Driver built in...

We don't touch the main CPU of the embroidery machine.

So, it's the most suitable sequin device to attach at any brands' embroidery machine except barudan round shape. We only need to know the head interval of the machine for the harness. All the harness work is also easy so that every lines are made of different connector shape. So, it just plugs in with the same shape of connector only. You can see the sequins cleary through the specially made of acrylic cover of the sequin knife base. You can use normal spangle(sequin) - 100% polyester 150 micron film. The standard sequin size is 5mm.
No matter about the shapes of sequin. Additionally, you can have 3mm, 4mm, 6mm, 7mm as extra option. Changing the extra part, it needed 5minutes per unit.
It's only need a power supply (24V) additionally to make the sequin work separately to avoid causing problem with main CPU of the machine.

9. No hole, no damage to the main machine.

We use special supporter to attache our sequin device at the main embroidery machine. No more hole and No more damage.

IT SUIT WITH ALL KINDS OF FABRICS INCLUDING NET, MASH AND

LEATHERS.

IT SUIT TO ANY EMBROIDERY MACHINE (i.e., TAJIMA, ZSK, HAPPY, SWF,

BARUDAN, BROTHER,

TOYOTA or CHINESE)

So, just try it!

you will love it!

Ⅰ.TECHNICAL DATA

SEQUIN SIZE : 5MM. (different shapes and different sizes (from4 -7MM) are applicable.

CAPACITY(SPEED) : 250 -2,000RPM

SEQUIN BOBBIN REEL SIZE : 100, 200 or 300M(UNIT/M)

STEPPING MOTOR : PULSE MOTOR x1 PER HEAD

ELECTRICITY : 3P 220V. 380V 50HZ/60HZ

ELECTRICITY CONSUMPTION : 1KW

RATING ELECTRICITY : 3KVA

* The above specifications are changeable subject to head q'ties.

II. FEATURES

1SET OF SEQUIN DEVICE UNIT PER HEAD

1SET OF STEPPING MOTOR/DRIVE/CONTROLLER PER HEAD

1SET OF AIR CYLINDER PER HEAD

1SET OF SEQUIN GUIDE UNIT PER HEAD

1SET OF SEQUIN HARNESS PER HEAD

1SET OF SOL-VALVE/AIR LUBRICATOR/AIR FILTER PER MACHINE

1SET OF POWER SUPPLY PER MACHINE

III. INSTALLATION

- Installation time of the sequin device
   Power supply : 1 hour approx.
   Sequin unit : 30 minutes per unit
   I.e.. : 20units x 30min. + 1hour = 11hours including harness work.

SHOWING THE PRODUCTS BY MOVIE

THE COMPUTERIZED AUTOMATIC HOT SPANGLE MOTIF MAKING MACHINE

IS ANYBODY THERE WHO REALLY INTERESTED IN HOT SPANGLE MOTIF MAKING MACHINE AUTOMACALLY?

If then, please don't hesitate to contact us .

Computerized Embroidery machine

Cording Device

We can provide you the movie CD including all the information you want to know. Please feel free to contact us....

Comtex Co., Ltd

Rm.413, Classic Tower, Dapsimni 5, Dongdaemun-Gu, Seoul, Korea

Tel:+822-2214-9941 Fax:+822-2214-9942